Stainless steel spin flash dryer for pharmaceutical industry

Description of Spin Flash Dryer:

The spin Flash Dryer is widely used in the dispersion and drying of granular, powdery, paste-like, and filter cake-like false agglomerates in the chemical, pharmaceutical, building materials, food, feed, and other industries. The flash dryer has the advantages of small occupied areas, low energy consumption, high thermal efficiency, and continuous mass production. The flash dryer body is provided with a rotary cutting device, and the dry material is subjected to shearing, rotating, collision, friction, etc., so that the material is pulverized and refined, and is highly dispersed, thereby achieving the effect of efficiency and rapidly evaporating water. The dryer is equipped with an air filter to achieve the cleanliness of the hot air and to provide production conditions for the hygiene requirements of the food industry. The machine sets the cyclone separation and collecting materials. In addition, the bag dust removal receipt is added to increase the material recovery rate. It can improve the economic efficiency of enterprises. The dryer can be customized according to user needs.

XSG series spin Flash Drying Machine is my factory in the introduction, absorption, on the basis of foreign advanced technology, successfully developed a new type of Drying Equipment. This advanced technology, reasonable design, compact structure, wide scope of application, large production capacity, products of good quality and high efficiency, energy-saving, in dry equipment, crushing, sieving one-time completed, eliminate the pollution of the environment, the whole machine performance reached the international advanced technology level.

Work principle of Spin flash dryer:

The cyclone flash dryer is composed of a drying host, a feeder, a heat source device (hot stove or steam), an air filter, a blower, a cyclone separator, a bag filter, an induced draft fan, and other key components. The hot air enters the bottom of the dryer tangentially and is driven by the agitator to form a powerful rotating wind field. Paste material enters the dryer from the screw feeder. Under the strong action of the high-speed rotating stirring blade, the material is dispersed under the action of impact, friction, and shearing force. The block material is quickly crushed, fully contacted with hot air, and heated. , dry. The dried material after dehydration rises with the hot airflow, the grading ring traps large particles, and the small particles are discharged out of the dryer from the center of the ring and recovered by the cyclone separator and dust collector. The incomplete or large materials are thrown to the wall by centrifugal force. , And fall to the bottom to be crushed and dried.

Parameters of Spin flash dryer: